Uni-Solar 136W PV Module
Uni-Solar 136W PV Module, Amorphous, Laminate, Black, 24V, PVL-136
136 Watt Solar Laminate (PVL-136)
UNI-SOLAR® photovoltaic laminates (PVL) are flexible and lightweight laminates made exceptionally durable by encapsulation in UV stabilized polymers. The polymer encapsulation is partially constructed of durable ETFE, (example, Tefzel®) a high-light-transmissive polymer.
Features
* Power ratings from 68 W to 144 W
* Lightweight & flexible
* Easy peel & stick application with quick-connect terminals
* Virtually unbreakable (no glass)
* Shadow & high heat tolerant
* UL 1703 listed to 500 VDC
* IEC 61646 v1 certified
* IEC 61646 v2 and 61730, TUV certification pending
Applications
* Metal roof shade & parking structures
* Commercial & residential metal roofing
* Commercial membrane (TPO, EPDM)
* Commercial modified bitumen roofing
Specifications
Electrical Specifications
STC
(Standard Test Conditions)
(1000 W/m2, AM 1.5, 25°C Cell Temperature) NOCT
(Nominal Operating Cell Temperature)
(800 W/m2, AM 1.5, 1 m/sec. Wind)
Maximum Power (Pmax):
136 W
Maximum Power (Pmax):
105 W
Voltage at Pmax (Vmp):
33.0 V
Voltage at Pmax (Vmp):
30.8 V
Current at Pmax (Imp):
4.13 A
Current at Pmax (Imp):
3.42 A
Short Circuit Current (Isc):
5.1 A
Short Circuit Current (Isc):
4.1A
Open-Circuit Voltage (Voc):
46.2 V
Open-Circuit Voltage (Voc):
42.2 V
Maximum Series Fuse Rating:
8 A
NOCT:
46°C
Temperature Coefficients
(at AM 1.5, 1000 W/m2 irradiance)
Temperature Coefficient (TC) of Isc:
0.001 / °K (0.10% / °C)
Temperature Coefficient (TC) of Voc:
-0.0038 / °K (-0.38% / °C)
Temperature Coefficient (TC) of Pmax:
0.0021 / °K (-0.21% / °C)
Temperature Coefficient (TC) of Imp:
-0.001 / °K (-0.10% / °C)
Temperature Coefficient (TC) of Vmp:
-0.0031 / °K (-0.31% / °C)
y = yreference • [1 + TC • (T - Treference)]
Construction Characteristics
Dimensions (L x W x D):
Length: 216 x 15.5 x 0.2" (in) / 5486 x 394 x 4 mm
0.6" (16 mm) including potted terminal housing assembly
Weight:
17.0 lbs / 7.7 kg
Output Cables:
4 mm2 (12 AWG) cable with weatherproof DC rated quick-connect terminals (e.g., Multi-Contact (MC®) Connectors); 22" (560 mm)
length
Cell Type:
22 triple junction amorphous silicon solar cells 356 mm x 239 mm
(14" x 9.4") connected in series
Adhesive:
Ethylene propylene copolymer adhesive-sealant with microbial
inhibitor
Bypass Diodes:
Connected across every solar cell
Encapsulation:
Durable ETFE high light-transmissive polymer
Notes:
1.
During the first 8-10 weeks of operation, electrical output exceeds specified ratings. Power output
may be higher by 15%, operating voltage may be higher by 11% and operating current may be
higher by 4%.
2.
Electrical specifications are based on measurements performed at standard test conditions of
1000 W/m2 irradiance. Air Mass 1.5, and cell temperature of 25°C after stabilization.
3.
Actual performance may vary up to 10% from rated power due to low temperature operation,
spectral and other related effects. Maximum system open-circuit voltage not to exceed 600 VDC
per UL.
4.
Specifications subject to change without notice.
UNI-SOLAR 136 Watt Solar Laminate (PVL-136) IV Curves
UNI-SOLAR 136 Watt Solar Laminate (PVL-136) Dimensions
UNI-SOLAR 136 Watt Solar Laminate (PVL-136) Data Sheet (PDF, 1.5M) Spanish Data Sheet (PDF, 869K) PVL Installation Guide - Metal Roofs (PDF, 1.5M) PVL Installation Approval & Warranty Packet (PDF, 410K)
Specifications
